Task Analysis of Laparoscopic and Robotic Procedures

Task Analysis For Laparoscopic Salpingotomy
Gynecology / Jul 24th, 2019 12:30 pm     A+ | a-

TASK ANALYSIS FOR LAPAROSCOPIC SALPINGOTOMY

Dr. Anjali Gupta M.S (OBS AND GYNE) AJMER RAJASTHAN

Laparoscopic Salpingotomy
Preoperative preparations:

1. Blood investigations and Pre-Anesthetic check-up
2. Crossmatch
3. Informed consent
4. Preoperative Antibiotics
5. Surgical team: Surgeon, Anesthetist, Assistant, Scrubbed nurse

Equipment and Laparoscopy Tower:

1. Monitor (Desirable 26” HD)
2. Light Source and Camera Control Unit (Desirable – LED light source and 3 Chip HD Camera)
3. Insufflators and CO2 Gas Cylinder
4. Electro Surgical Unit (Desirable – High-Frequency Generator)
5. Select Pre-set Pressure (Ideal 12 to 15mmHg)
6. Video Recorder & Printer
7. Suction Irrigation system
8. Veress' needle – 12 cm length
9. Ports: One 10mm reusable port, two 5mm ancillary ports

Laparoscopic set :

. Maryland.
. Laparoscopy Aspiration Needle
. Laparoscopic scissors
. Atraumatic grasping forceps
. Tritome
. Suction Irrigation 5 mm
. Syringe and Normal Saline (10ml)
. Vasopressin 5 unit diluted in 20 ml of saline.
. Sterile dressing

Position of the patient: Supine position

Position of the surgical team and equipment:

1. The surgeon should stand on the left side of the patient and the distance from the screen is 5 times
diagonal length of the screen which is placed opposite and in front of the surgeon.
2. Assistant on the right of the surgeon.
3. Scrub nurse on the left of the surgeon.
4. Anesthetist in the usual position on the head end.

Procedure:

Optical port site inferior Crease of Umbilicus (Scandinavian method)

1. Hold umbilicus with Allis forceps on either side to Evert the inferior crease of umbilicus
2. Make a stab incision of 2mm with No. 11 surgical blade
3. Check Veress Needle for its spring action and patency
4. Lift up the abdominal wall below the umbilicus and assess its full thickness,
5. Veress Needle is held like a dart at a distance of 4 cm plus the thickness of the abdominal wall from its
distal end.
6. Insertion of veress needle through the incision site in a manner that the veress needle makes an
angle of 90’ with the abdominal wall and an angle of 45’ with the body of patient, pointing towards
the anus.
8. Insertion is achieved with two audible clicks; first of the Rectus Sheath and second of the
Peritoneum
9. Release the Allis forceps from the Abdominal wall
10. Hold the Veress Needle at an angle of 45’ making sure that no further length of needle is
advanced.
11. Confirm the intraperitoneal placement of the veress needle by ASPIRATION TEST,
IRRIGATION TEST and HANGING DROP TEST
12. Ensure that the Gas tubing is attached to the Insufflator and the Insufflator is switched ON. This
will remove air from the Gas tubing and fill the gas tubing till its tip with CO2 gas.
13. Confirm Pre-Set Pressure to 15mmHg on the Insufflator
14. Attach the gas tubing to the veress needle and start the flow of CO2gas at 1 liter per minute
15. Confirm obliteration of liver dullness and generalized distension of abdominal wall
16. Keep watch on patient’s vital parameters and EtCO2 readings during insufflation
18. The total amount of gas and actual pressure should rise in a linear fashion.
19. When actual pressure has reached pre-set pressure and amount of gas used might vary between
1.5 to 6 liters for an averagely build young patient
20. Once the pressure reaches the pre-set pressure, remove the veress needle and use size 11 blade to
make a smiling skin incision on the infra umbilical crease, to fit a 10mm port. This can be prechecked by placing a 10mm port on the skin for estimation of incision size. Use the tip of an artery
forceps to dilate the urachus as per the Scandinavian technique of primary port placement.
21. Insert the 10mm cannula with trocar by oscillatory screwing motion, the direction being
perpendicular till give way sensation is perceived and then change the direction towards the pelvis.
Once you are in, the trocar should be removed and the telescope should be inserted to confirm the
intraperitoneal placement
22. Connect the insufflator to the optical port and switch on the gas.
23. To begin with, an overview inspection of the entire abdomen must be done and noted.
24. Then reach out to the target organ (fallopian tube of affected side), just about to touch it with the tip
of the telescope, and trans-illuminate the anterior abdominal wall to delineate the site of the target.
25. Use the baseball diamond concept to mark the position of the additional 5 mm ports.
26. The surgeon must use transillumination to avoid any vessel injuries in prospective port sites. Use the
size 11 blade to make small incisions to fit the 5mm ports at the pre-marked sites as per Baseball
diamond concept.
27. Insert both the 5mm ports under direct vision and using principles same as that used for the primary
port to avoid inadvertent visceral and vascular injuries.

Identification of fallopian tube with ectopic pregnancy in situ:

1. find the affected side fallopian tube by using atraumatic grasper and a Maryland as probes only.
The contralateral tube must also be inspected to determine if it is healthy or not.
2. The affected tube is identified and mobilized to minimize bleeding, 5to8 ml diluted solution
containing 5 unit vasopressin in 20 ml of normal saline is injected with a 20 gauge spinal or
laparoscopic needle, Inject vasopressin in the mesosalpinx just below the ectopic and over the
antimesenteric surface of the tubal segment containing the trophoblastic tissue.
3. After stabilizing the tube by grasper in one hand and tritome in other, a linear incision is made on
the antimesenteric surface extending 1-2 cms over the thinnest portion of the tube. follow the
principles of the hook , look and cook while using the energy source.
4. The fine needle tip should be used in the cutting mode, and should barely touch the tissue surface.
5. It is important to remain aware of the location of underlying or adjacent structures..
6. The products of conception usually should protrude through the incision and slowly slip out of the
tube, it may be released gently out using hydro dissection or laparoscopic atraumatic forceps.
7. As pregnancy is pulled out or extruded from the tube it can be placed in a plastic or endobag and
removed through 10mm port on the umbilicus, under vision with the 5mm telescope in the lateral
port.
8. After the pregnancy is removed visualize for hemostasis.
9. The 10mm umbilical port fascia must be closed using a veress needle as a suture passer(Suture
used is vicryl 0.0). remove the optical port slowly with the edge of telescope inspecting the fascial
planes to avoid any bowel herniation.
10. Don’t abruptly remove the primary port
11. Keep the telescope in the abdominal cavity and start withdrawing the cannula
12. Continue to observe this withdrawal process on the monitor
13. Once the cannula has reached within the abdominal wall then start withdrawing the telescope
14. Remove the cannula and the Telescope under vision.
15. This process will avoid entrapment of Omentum or Bowel within the Primary port wound
16. Primary Port fascia and Skin closed; Secondary Port Skin should be closed
17. The skin should be closed with a fine Monofilament suture
18. Abdomen cleaned and Port site wound dressing applied
19. The patient is monitored by the anesthesia team and post-operative vitals are noted.

Tissue retrieved must be sent for histopathological examination. Provide Surgery Photos or Surgical Video to the patient. Provide Discharge Summary documenting Institute findings of the surgery.
4 COMMENTS
Dr Vikash kumar
#1
May 22nd, 2020 10:22 am
Very interesting and explained in a way any one can understand.Thanks for sharing Task Analysis For Laparoscopic Salpingotomy.
Dr. Abhilash
#2
May 22nd, 2020 10:33 am
This is a very informative Task Analysis for Laparoscopic Salpingotomy. Explained all the steps of surgery is very useful,. I have benefited from reading this, Thanks for sharing.
Dr. Abdul Hai
#3
May 22nd, 2020 10:44 am
Beautifully explained and very interesting.I wish I've found this earlier step!! amazing explanation of Task Analysis for Laparoscopic Salpingotomy surgery all step are cleared. This was so helpful.
Dr. Binita Nair
#4
May 22nd, 2020 10:46 am
Excellent step and very interesting to learn useful technique. Thanks for the Task Analysis for Laparoscopic Salpingotomy. Thanks for uploading.
Leave a Comment
CAPTCHA Image
Play CAPTCHA Audio
Refresh Image
* - Required fields
Older Post Home Newer Post
Top

How to Perform and Implement Task Analysis of Laparoscopic and Robotic Procedures

Task analysis is a critical component of any complex surgical procedure, including laparoscopic and robotic surgeries. It involves breaking down the procedure into its constituent tasks, identifying the steps, skills, and cognitive processes required. Task analysis not only enhances the understanding of these intricate surgeries but also serves as a foundation for training, skill assessment, and continuous improvement in healthcare. In this essay, we will delve into how to conduct and implement task analysis for laparoscopic and robotic procedures.

Task Analysis of Laparoscopic Surgery

Understanding the Significance of Task Analysis

Before we explore the procedure for task analysis, it's essential to recognize why it is of paramount importance in the realm of surgery, particularly for laparoscopic and robotic procedures.

1. Enhanced Learning and Training: Task analysis helps in developing structured training programs. It breaks down complex procedures into manageable components, making it easier for trainees to learn and practice each step methodically.

2. Skill Assessment: By understanding the tasks and sub-tasks involved, it becomes possible to assess the competence of surgeons and surgical teams. This is crucial for ensuring patient safety and quality care.

3. Workflow Optimization: Task analysis can reveal inefficiencies in surgical workflows. Identifying these bottlenecks allows for process improvements, potentially reducing surgical times and enhancing outcomes.

4. Error Reduction: Recognizing potential points of error is vital for preventing surgical complications. Task analysis can highlight critical steps where errors are more likely to occur, leading to proactive measures to mitigate risks.

Procedure for Task Analysis of Laparoscopic and Robotic Procedures:

Task analysis for laparoscopic and robotic procedures involves several steps:

Step 1: Define the Surgical Procedure

Begin by clearly defining the surgical procedure you wish to analyze. Whether it's a laparoscopic cholecystectomy or a robotic prostatectomy, having a specific procedure in mind is essential.

Step 2: Gather Expert Input

Engage experts in the field, including experienced surgeons, nurses, and other surgical team members. Their input is invaluable in identifying and detailing the tasks involved.

Step 3: Identify the Tasks and Sub-Tasks

Break down the surgical procedure into tasks and sub-tasks. For instance, in a laparoscopic cholecystectomy, tasks could include trocar placement, camera insertion, gallbladder dissection, and suturing. Sub-tasks under "trocar placement" might involve choosing trocar sizes, making incisions, and inserting trocars.

Step 4: Sequence the Tasks

Establish the chronological order of tasks. Determine which tasks are dependent on others and identify any parallel processes. Sequencing tasks is essential for understanding the flow of the procedure.

Step 5: Define Task Goals and Objectives

For each task and sub-task, define the goals and objectives. What should be achieved in each step? For instance, in gallbladder dissection, the goal might be to safely detach the gallbladder from the liver while preserving nearby structures.

Step 6: Skill and Equipment Requirements

Specify the skills and equipment required for each task. Consider the level of expertise needed, such as basic laparoscopic skills or advanced robotic manipulation. Document the instruments and technology involved.

Step 7: Cognitive Processes

Identify the cognitive processes involved, such as decision-making, spatial orientation, and problem-solving. Understanding the mental aspects of surgery is critical for training and error prevention.

Step 8: Consider Variations and Complications

Acknowledge potential variations in the procedure and anticipate complications. How would the surgical team adapt if unexpected issues arise? Task analysis should encompass both the standard procedure and potential deviations.

Step 9: Develop Training and Assessment Tools

Use the task analysis results to create structured training modules. These modules should align with the identified tasks, objectives, and skill requirements. Additionally, design assessment tools to evaluate the competence of trainees and surgical teams.

Step 10: Continuous Improvement

Task analysis is not a one-time endeavor. Regularly revisit the analysis to incorporate new techniques, technology, and best practices. Continuous improvement is vital for staying at the forefront of surgical care.

Implementing Task Analysis Results:

Once task analysis is complete, it's crucial to implement the findings effectively:

1. Training Programs: Develop and deliver training programs based on the task analysis. These programs should encompass both simulation-based training and real-life surgical experience.

2. Skill Assessment: Use the assessment tools developed during task analysis to evaluate the skills of surgical teams. This can be done through structured evaluations and objective metrics.

3. Quality Improvement: Task analysis can reveal areas for process improvement. Work with the surgical team to implement changes that enhance efficiency and patient outcomes.

4. Error Prevention: Utilize the identified points of error to develop strategies for error prevention. This might involve checklists, preoperative briefings, and enhanced communication protocols.

5. Research and Innovation: Task analysis can also guide research efforts, leading to the development of new techniques and technologies that improve surgical procedures.

In conclusion, task analysis is an indispensable tool in understanding, teaching, and advancing complex surgical procedures such as laparoscopic and robotic surgeries. By meticulously dissecting each task and sub-task, identifying skill requirements, and considering cognitive processes, healthcare professionals can enhance patient safety, optimize surgical workflows, and continually improve the quality of surgical care. Task analysis is not merely an analytical exercise; it is a pathway to excellence in surgical practice.

In case of any problem in viewing task analysis please contact | RSS

World Laparoscopy Hospital
Cyber City
Gurugram, NCR Delhi, 122002
India

All Enquiries

Tel: +91 124 2351555, +91 9811416838, +91 9811912768, +91 9999677788



Need Help? Chat with us
Click one of our representatives below
Nidhi
Hospital Representative
I'm Online
×