Task Analysis of Laparoscopic and Robotic Procedures

Task Analysis of Laparoscopic Splenectomy
General Surgery / Oct 5th, 2017 10:45 am     A+ | a-
Dr. Ikhtiyar Saud Nasser


PROCEDURE STEPS:
  1. Patient put under general anaesthesia .
  2. Patient preparation and positioning.
  3. Surgeon , patient and monitor should be at coaxial alignment.
  4. Establishment of the access by Veress needle .
  5. Gas insufflation with CO2.
  6. Ports insertion.
  7. Surgical steps .
  8. Specimen retrieval .
  9. Ports closure .
  10. Deflation  of the abdomen.
  11. Skin closure.
  12. Patient  extubation.
 
Executional  steps :
  • General Anaesthesia :
  1. Patient should be under GA.
  2. NGT to be inserted.
  3. Position the patient in supine position.
  4.  Availability of the following  instruments should be checked :
    1. Access instruments : Blade 11,  Veress needle, one 10 mm port, two 5 mm ports.
    2. Optical instruments: 10 mm telescope, camera, light cable .
    3. Operating instruments : Maryland , semi-traumatic grasper, endo-GIA stapler,  endoclips, Curved endoscissor, endobag.
    4. Energy  instruments : Harmonic.
  5. Check the function of the monitor, insufflator ,light source, amount of gas cylinder, harmonic setting frequency between 3-5, and check the monopolar function for cutting and coagulation.
  • Patient and surgeon Positioning :
  1. Table height should be adjusted to the surgeon height (0.49 X surgeon height ).
  2. Patient should be prepped form the nipples to the mid-thighs. Patient draping and cable arrangement.
  3. The surgeon should stand at the right side of the patient, The monitor at the left side of the patient 
  4. The monitor, target organ and surgeon should be aligned in coaxial alignment.
  5. The monitor should be at 15 degree below the surgeon eyes and 5 times of its diagonal diameter away from the surgeon.
  • Access and Insufflation:
  1. Position the patient in right lateral decubitus with blankets put between the chest and the pelvis to elevate the area between the ribs and pelvis to have more visualization of the spleen.
  2. With 11 blade a 2mm incision is made at 10 cm lateral to the umbilicus mid clavicular line a Size 10 Veress needle is inserted perpendicularly to the abdominal wall: starting with checking the veress needle  function and patency  by flushing it with NS  and hearing 2 clicks of the valve.
  3.  The length of the needle which should be inserted should be 4cm + abdominal wall thickness .Veress Needle  should be hold as dart at 90 degree. Will feel  2 areas of resistance, should be intrabdominal after the you passed the 2nd area.
  4. Check the position of the Veress needle by 3 ways:
    1. Flush the needle with NS which should go easily.
    2. Aspirate, nothing should come.
    3. Hanging drop test:  drops of NS are placed at the cannula of the needle, should sink  when  lower abdominal wall is lifted.
       5. Qudrimanometric 40 litres Insufflator to be on , the following setting should be applied:
                  a.Set pressure 12 and flow 1 L / min.
       6.  The gas tube  should be flushed with CO2 before attaching it the veress needle.
       7.The gas tube to be attached to the veress needle and start insufflation , making sure that the abdomen is tympanic            and distended equally in all quadrants. Insufflators parameters should be observed carefully during insufflation .
       8. Once the actual pressure reach to the set pressure of 12 mmHg , Veress needle will be removed.
       9. At the verses needle insertion wound it is increased to 10mm.
     10. 10mm port is inserted and attached to the gas tube.
     11. 30 degree Camera to be adjusted in terms of white balance, and focus.
     12. Camera to be inserted and check for any bleeding, adhesion or bowel injury. Determine the spleen hilum
  • Working ports insertion :
  1. Based on baseball diamond concept working ports sites are determined after visualizing the hilum and two 5mm ports are inserted under direct visualization to be contralateral in their position.
  2. Liver retractor can be added at the epigastric area if needed
  • Surgical steps :
  1. Determine the splenocolic and phernocolic ligament and both of them will be dissected using harmonic starting with splenocolic.
  2. The lower part will be mobilized and the spleen will be lifted up. The hilum and short gastrics will be exposed
  3. Using harmonic the short gastrics (gastrosplenic ligament) are dissected and separated from the spleen.
  4. Increasing one of the 5mm ports to 12 mm to insert an endo-GIA stapler.
  5. After inserting the endo-GIA, the splenic hilum vessels which include the splenic artery and vein are ligated using it. (It is preferred since the vessels lie parallel to each other, so the chance of AV fistula is less)
  6. After the hilum vessels are ligated the phernosplenic ligament is dissected and the spleen is freely mobile in the abdomen
  7. Ensure that haemostasis is maintained.
  8. Using the 12mm incision a size D Endo bag is inserted and the spleen is extracted through it. (If needed the spleen can be morcellated inside the endo bag using sponge forceps)
  • Ports removal and closure:
  1. Under direct vision, the 5mm port is removed.
  2. The 10mm and 12 mm incisions facia is closed using Vicryl 0 by suture passer.
  3. Gas insufflation is stopped , abdomen is deflated
  4. All Skin incisions are  closed using Vicryl or staplers.
5 COMMENTS
Dr. Suresh Kumar
#1
May 24th, 2020 12:34 pm
Very good article with clear and simple explanation! keep up the good work! Thank you for suitable step in very easy way to learn. Thanks for sharing this Task Analysis of Laparoscopic Splenectomy surgery.
Dr. Sailaja
#2
May 24th, 2020 12:49 pm
wow!!! BEYOND helpful! Very interesting and explained in a way a layman can understand. Wonderful content! Dr. Mishra everytime I watch your videos I feel smart ???? thanks Was worth it tho!
Thanks for posting Laparoscopic Splenectomy surgery.

Areen D Wanrio
#3
May 24th, 2020 1:00 pm
wow!!! BEYOND helpful! recently i have read your Task Analysis and it is very interesting and explained in a way i understand. Wonderful content! Thanks for posting Task Analysis of Laparoscopic Splenectomy
Dr. David Cameroon (Madagascar)
#4
May 24th, 2020 1:21 pm
I need permission to use your video & Task Analysis to teach PG students for research purpose. Please permit me for this. Thank you.Can't thanks u enough always eagerly waiting for your videos.. This one was masterpiece!! really well explained. I was able to understand Laparoscopic Splenectomy surgery.

Dr. Prasanth Bordoloi
#5
May 24th, 2020 1:31 pm
Amazing Task Analysis of Laparoscopic Splenectomy, this helped me understand the information much more.This is was very helpful.Thank you!
Leave a Comment
CAPTCHA Image
Play CAPTCHA Audio
Refresh Image
* - Required fields
Older Post Home Newer Post
Top

How to Perform and Implement Task Analysis of Laparoscopic and Robotic Procedures

Task analysis is a critical component of any complex surgical procedure, including laparoscopic and robotic surgeries. It involves breaking down the procedure into its constituent tasks, identifying the steps, skills, and cognitive processes required. Task analysis not only enhances the understanding of these intricate surgeries but also serves as a foundation for training, skill assessment, and continuous improvement in healthcare. In this essay, we will delve into how to conduct and implement task analysis for laparoscopic and robotic procedures.

Task Analysis of Laparoscopic Surgery

Understanding the Significance of Task Analysis

Before we explore the procedure for task analysis, it's essential to recognize why it is of paramount importance in the realm of surgery, particularly for laparoscopic and robotic procedures.

1. Enhanced Learning and Training: Task analysis helps in developing structured training programs. It breaks down complex procedures into manageable components, making it easier for trainees to learn and practice each step methodically.

2. Skill Assessment: By understanding the tasks and sub-tasks involved, it becomes possible to assess the competence of surgeons and surgical teams. This is crucial for ensuring patient safety and quality care.

3. Workflow Optimization: Task analysis can reveal inefficiencies in surgical workflows. Identifying these bottlenecks allows for process improvements, potentially reducing surgical times and enhancing outcomes.

4. Error Reduction: Recognizing potential points of error is vital for preventing surgical complications. Task analysis can highlight critical steps where errors are more likely to occur, leading to proactive measures to mitigate risks.

Procedure for Task Analysis of Laparoscopic and Robotic Procedures:

Task analysis for laparoscopic and robotic procedures involves several steps:

Step 1: Define the Surgical Procedure

Begin by clearly defining the surgical procedure you wish to analyze. Whether it's a laparoscopic cholecystectomy or a robotic prostatectomy, having a specific procedure in mind is essential.

Step 2: Gather Expert Input

Engage experts in the field, including experienced surgeons, nurses, and other surgical team members. Their input is invaluable in identifying and detailing the tasks involved.

Step 3: Identify the Tasks and Sub-Tasks

Break down the surgical procedure into tasks and sub-tasks. For instance, in a laparoscopic cholecystectomy, tasks could include trocar placement, camera insertion, gallbladder dissection, and suturing. Sub-tasks under "trocar placement" might involve choosing trocar sizes, making incisions, and inserting trocars.

Step 4: Sequence the Tasks

Establish the chronological order of tasks. Determine which tasks are dependent on others and identify any parallel processes. Sequencing tasks is essential for understanding the flow of the procedure.

Step 5: Define Task Goals and Objectives

For each task and sub-task, define the goals and objectives. What should be achieved in each step? For instance, in gallbladder dissection, the goal might be to safely detach the gallbladder from the liver while preserving nearby structures.

Step 6: Skill and Equipment Requirements

Specify the skills and equipment required for each task. Consider the level of expertise needed, such as basic laparoscopic skills or advanced robotic manipulation. Document the instruments and technology involved.

Step 7: Cognitive Processes

Identify the cognitive processes involved, such as decision-making, spatial orientation, and problem-solving. Understanding the mental aspects of surgery is critical for training and error prevention.

Step 8: Consider Variations and Complications

Acknowledge potential variations in the procedure and anticipate complications. How would the surgical team adapt if unexpected issues arise? Task analysis should encompass both the standard procedure and potential deviations.

Step 9: Develop Training and Assessment Tools

Use the task analysis results to create structured training modules. These modules should align with the identified tasks, objectives, and skill requirements. Additionally, design assessment tools to evaluate the competence of trainees and surgical teams.

Step 10: Continuous Improvement

Task analysis is not a one-time endeavor. Regularly revisit the analysis to incorporate new techniques, technology, and best practices. Continuous improvement is vital for staying at the forefront of surgical care.

Implementing Task Analysis Results:

Once task analysis is complete, it's crucial to implement the findings effectively:

1. Training Programs: Develop and deliver training programs based on the task analysis. These programs should encompass both simulation-based training and real-life surgical experience.

2. Skill Assessment: Use the assessment tools developed during task analysis to evaluate the skills of surgical teams. This can be done through structured evaluations and objective metrics.

3. Quality Improvement: Task analysis can reveal areas for process improvement. Work with the surgical team to implement changes that enhance efficiency and patient outcomes.

4. Error Prevention: Utilize the identified points of error to develop strategies for error prevention. This might involve checklists, preoperative briefings, and enhanced communication protocols.

5. Research and Innovation: Task analysis can also guide research efforts, leading to the development of new techniques and technologies that improve surgical procedures.

In conclusion, task analysis is an indispensable tool in understanding, teaching, and advancing complex surgical procedures such as laparoscopic and robotic surgeries. By meticulously dissecting each task and sub-task, identifying skill requirements, and considering cognitive processes, healthcare professionals can enhance patient safety, optimize surgical workflows, and continually improve the quality of surgical care. Task analysis is not merely an analytical exercise; it is a pathway to excellence in surgical practice.

In case of any problem in viewing task analysis please contact | RSS

World Laparoscopy Hospital
Cyber City
Gurugram, NCR Delhi, 122002
India

All Enquiries

Tel: +91 124 2351555, +91 9811416838, +91 9811912768, +91 9999677788



Need Help? Chat with us
Click one of our representatives below
Nidhi
Hospital Representative
I'm Online
×