Task Analysis of Laparoscopic and Robotic Procedures

Laparoscopic IPOM for Inguinal Hernia by suturing
General Surgery / Aug 28th, 2017 5:06 am     A+ | a-
Dr Mahendra kumar Awotar
General Surgeon, World Laparoscopy Hospital
FMAS & DMAS, AUGUST 2017

Procedural steps:
 
1. General anesthesia 
2. Part preparation and patient positioning
3. Setting up -Surgeon and OT, according to ergonomics
4. Access to peritoneal cavity
5. Creating pneumoperitoneum
6. port positioning
7. Surgical steps
8. Mesh placement and fixation
9. Port closure 
10. Post operative care

Executional steps:

1. General anesthesia –

General Anesthesia with endo tracheal tube is required with proper multi parameter monitoring, specially ETCO2 .
Single shot of pre-operative antibiotics should be given.
Foley catheter must be placed and stockings have to be applied.

2. Part preparation and patient positioning:

The patient is placed in the Trendelenburg position so as to make bowel fall away from the operative site i.e. pelvic region. Optional left or right tilt can be given as required.

3. Setting up - Surgeon and OT, according to ergonomics:

All devices and instruments needed must be checked for proper functioning & insulation. OT should be set as per principles of ergonomics in laparoscopic surgery like-

a. suitable table height of 0.49 x surgeon’s height (around 60 to 70 cm from ground) 
b. placement of monitor at a distance of 5 times its diagonal length 
c. height of monitor should be  200  from his/her visual axis
d. Surgeon –hernia site- monitor all should be in same axis.

4. Access to peritoneal cavity (closed technique):

 Make a stab incision on the skin, using a scalpel blade No. 11 at inferior crease of umbilicus.
 Lift the abdominal wall and insert the Veress needle through the incision at a 450 angle to the body of patient and perpendicular to the lifted abdominal wall (directing to anal canal).
 After you hear the “two click” sounds, confirmation of intra-peritoneal entry is done by irrigation, aspiration and hanging drop tests.
• Make a smiling incision on the inferior crease of umbilicus of 11mm.
 Using Scandinavian technique (i.e. separating fibers of obliterated vitellointestinal duct), to gain safe entry to the intra-peritoneal space, insert the cannula using the pyramidal trocar with screwing movements into the peritoneal cavity till you get the air sound or loss of resistance.
 Access can even be achieved by open technique i.e. Hassan’s method by incising all abdominal wall layers except peritoneum and entry with blunt trocar which is fixed on either shoulders with sutures.

5. Creating pneumoperitoneum:

• Connect the CO2 either to the Veress needle (for closed technique) or the port (for open technique)
 Begin inflating the intra-peritoneal space with 1 lit/min for closed technique keeping an eye on Quadra manometer.
 Observe rise of the intra-abdominal pressure and total volume of gas as the abdomen and hernia gets distended.
• For the closed technique, after the intra-abdominal pressure reaches the preset pressure of 12-15mmHg, take the veress needle out of the abdomen.

6. Port positioning:

 Enlarge the infra umbilical skin crease incision up to 11mm.
 Slowly screw the cannula with the trocar into the peritoneal cavity in perpendicular direction. (Insufflation and abdominal wall lift will avoid the possible visceral injury.)
 camera settings - The camera is white-balanced and focused at a distance of 10 cm (focal length of 10 mm scope).
 Aperture and window should be wide with fibroscopic filter off and shutter speed in auto mode. The telescope is then advanced down through the umbilical port into the abdominal cavity under direct vision.
 All four quadrants of the abdomen are examined for any possible accidental pathological findings, if present.
 Then locate the site of action. It is the inguinal region either right or left or both depending upon the defect site/sites.
 Make an incision for 5mm lateral ports for operating instruments as per the “Baseball-Diamond” principle of port placement put forth by Dr. R. K. Mishra. Ports should be 5 to 7.5 cm on either side of telescope to keep azimuth angle of 150 to 450 .

7. Surgical steps:

 Contents of the hernia sac are reduced. Make wise use of energy sources for adhesiolysis as required.
• Identify all the anatomical landmarks in the inguinal region:

1. Median umbilical ligament 
2. Medial umbilical ligaments on either side
3. Two lateral umbilical ligaments                            
4. Triangle of doom
5. Triangle of pain 
6. Trapezoid of disaster 

 Proceed for mesh placement directly without any peritoneal or sac dissection which is advantage with IPOM technique.

8. Mesh placement and fixation:

 Adequate size of mesh selected with formula – size of defect + 12 cm, so that mesh projects 6 cm beyond the defect margin on each side.
 Mesh type usually selected is vypro / vypro II, ultra light weight mesh where polypropylene fibers are covered with polyglactin to avoid adhesions.
 This mesh covers all the hernia sites in groin.
 Now make a roll of mesh like cigar outside the abdomen.
 Hold the mesh with a needle holder with a 10 to 5mm reducer previously loaded over the shaft and pull the mesh within the reducer.
• Then introduce the mesh assembly through the 10 mm optical port.
• Now put the telescope in and unroll the mesh under vision.
 Now mesh is well placed in position to cover all the defects and area 6 cm beyond its margin.
 Multiple absorbable tackers are fired starting much lateral to triangle of pain, on inguinal ligament and then continued along arch of transverses abdominis muscle till cooper’s ligament (outer crowning).
 All the tackers must be fired above inguinal ligament to avoid entry in any danger area and even it should not be fired medial to medial umbilical ligament to avoid bladder.
 Inner crowning is done by firing couple of tackers near defect on and above inguinal ligament.
 Fixation of inferior margin of mesh started from inferomedial corner with absorbable suture using Dundee jamming knot and continuous sutures, as put forth by Dr. R.K.Mishra .
 Care should be taken to involve only peritoneum at 1 cm distance and avoid major vessels and nerves. Continuous interlocking suturing along the inferior edge of mesh from medial to lateral aspect with Aberdeen termination done.
 Note – inexperience can lead to major injuries and IPOM should be tried with fibrin glue rather than suturing.

9. Port closure:

 Before moving out the telescope the port entry sites are examined for bleeding.
 Suture passed within & out under vision using veress needle or suture passer to close all 10 mm ports under vision.
• Both 5 mm cannula taken out under vision without any fascial stitch.
 Pneumoperitoneum is relieved.
 Optic Cannula is removed with telescope within so as to make sure that neither the bowel nor the omentum had entered the port wound.
 Knot is tightened after removal of cannula.
 Skin is closed using skin staplers.
 Skin around the sutured wound is cleaned with antiseptic solution.

10. Post operative care:

• Elastic adhesive bandage with sponge at deep ring site for 2 days to avoid seroma collection.
 Immediately mobilize the patient on the same day.
 Remove the Foley’s catheter when the patient is able to void urine on his own.
 Administer appropriate antibiotic, analgesic, PPI, anti-emetics & I.V. fluids as required. Orals started on same day itself!!

 
1 COMMENTS
Dr. Joshua Theo
#1
May 26th, 2020 2:45 pm
Impressive Laparoscopy Training course. Your Explaining of each technique is very well presented. Amazing Article, I didn’t think there was more to learn about simple techniques. Thanks for sharing this Laparoscopic IPOM for Inguinal Hernia by suturing.
Leave a Comment
CAPTCHA Image
Play CAPTCHA Audio
Refresh Image
* - Required fields
Older Post Home Newer Post
Top

How to Perform and Implement Task Analysis of Laparoscopic and Robotic Procedures

Task analysis is a critical component of any complex surgical procedure, including laparoscopic and robotic surgeries. It involves breaking down the procedure into its constituent tasks, identifying the steps, skills, and cognitive processes required. Task analysis not only enhances the understanding of these intricate surgeries but also serves as a foundation for training, skill assessment, and continuous improvement in healthcare. In this essay, we will delve into how to conduct and implement task analysis for laparoscopic and robotic procedures.

Task Analysis of Laparoscopic Surgery

Understanding the Significance of Task Analysis

Before we explore the procedure for task analysis, it's essential to recognize why it is of paramount importance in the realm of surgery, particularly for laparoscopic and robotic procedures.

1. Enhanced Learning and Training: Task analysis helps in developing structured training programs. It breaks down complex procedures into manageable components, making it easier for trainees to learn and practice each step methodically.

2. Skill Assessment: By understanding the tasks and sub-tasks involved, it becomes possible to assess the competence of surgeons and surgical teams. This is crucial for ensuring patient safety and quality care.

3. Workflow Optimization: Task analysis can reveal inefficiencies in surgical workflows. Identifying these bottlenecks allows for process improvements, potentially reducing surgical times and enhancing outcomes.

4. Error Reduction: Recognizing potential points of error is vital for preventing surgical complications. Task analysis can highlight critical steps where errors are more likely to occur, leading to proactive measures to mitigate risks.

Procedure for Task Analysis of Laparoscopic and Robotic Procedures:

Task analysis for laparoscopic and robotic procedures involves several steps:

Step 1: Define the Surgical Procedure

Begin by clearly defining the surgical procedure you wish to analyze. Whether it's a laparoscopic cholecystectomy or a robotic prostatectomy, having a specific procedure in mind is essential.

Step 2: Gather Expert Input

Engage experts in the field, including experienced surgeons, nurses, and other surgical team members. Their input is invaluable in identifying and detailing the tasks involved.

Step 3: Identify the Tasks and Sub-Tasks

Break down the surgical procedure into tasks and sub-tasks. For instance, in a laparoscopic cholecystectomy, tasks could include trocar placement, camera insertion, gallbladder dissection, and suturing. Sub-tasks under "trocar placement" might involve choosing trocar sizes, making incisions, and inserting trocars.

Step 4: Sequence the Tasks

Establish the chronological order of tasks. Determine which tasks are dependent on others and identify any parallel processes. Sequencing tasks is essential for understanding the flow of the procedure.

Step 5: Define Task Goals and Objectives

For each task and sub-task, define the goals and objectives. What should be achieved in each step? For instance, in gallbladder dissection, the goal might be to safely detach the gallbladder from the liver while preserving nearby structures.

Step 6: Skill and Equipment Requirements

Specify the skills and equipment required for each task. Consider the level of expertise needed, such as basic laparoscopic skills or advanced robotic manipulation. Document the instruments and technology involved.

Step 7: Cognitive Processes

Identify the cognitive processes involved, such as decision-making, spatial orientation, and problem-solving. Understanding the mental aspects of surgery is critical for training and error prevention.

Step 8: Consider Variations and Complications

Acknowledge potential variations in the procedure and anticipate complications. How would the surgical team adapt if unexpected issues arise? Task analysis should encompass both the standard procedure and potential deviations.

Step 9: Develop Training and Assessment Tools

Use the task analysis results to create structured training modules. These modules should align with the identified tasks, objectives, and skill requirements. Additionally, design assessment tools to evaluate the competence of trainees and surgical teams.

Step 10: Continuous Improvement

Task analysis is not a one-time endeavor. Regularly revisit the analysis to incorporate new techniques, technology, and best practices. Continuous improvement is vital for staying at the forefront of surgical care.

Implementing Task Analysis Results:

Once task analysis is complete, it's crucial to implement the findings effectively:

1. Training Programs: Develop and deliver training programs based on the task analysis. These programs should encompass both simulation-based training and real-life surgical experience.

2. Skill Assessment: Use the assessment tools developed during task analysis to evaluate the skills of surgical teams. This can be done through structured evaluations and objective metrics.

3. Quality Improvement: Task analysis can reveal areas for process improvement. Work with the surgical team to implement changes that enhance efficiency and patient outcomes.

4. Error Prevention: Utilize the identified points of error to develop strategies for error prevention. This might involve checklists, preoperative briefings, and enhanced communication protocols.

5. Research and Innovation: Task analysis can also guide research efforts, leading to the development of new techniques and technologies that improve surgical procedures.

In conclusion, task analysis is an indispensable tool in understanding, teaching, and advancing complex surgical procedures such as laparoscopic and robotic surgeries. By meticulously dissecting each task and sub-task, identifying skill requirements, and considering cognitive processes, healthcare professionals can enhance patient safety, optimize surgical workflows, and continually improve the quality of surgical care. Task analysis is not merely an analytical exercise; it is a pathway to excellence in surgical practice.

In case of any problem in viewing task analysis please contact | RSS

World Laparoscopy Hospital
Cyber City
Gurugram, NCR Delhi, 122002
India

All Enquiries

Tel: +91 124 2351555, +91 9811416838, +91 9811912768, +91 9999677788



Need Help? Chat with us
Click one of our representatives below
Nidhi
Hospital Representative
I'm Online
×